-
-
-
-
whatsapp
-
WeChat
Products
-
Initial Efficiency Flat Panel Filter
-
High Temperature High Efficiency Filter
-
High efficiency paper filter
-
High efficiency filter without baffles
-
Highly efficient supply ceiling module
-
Highly efficient supply diffuser with mechanical seal
-
Initial Efficiency Panel Filter with Single Mesh Cover on One Side and Fold (Washable)
-
Sub-high efficiency filter W-shaped
-
Box High Efficiency Filter
-
Honeycomb chemical filter
-
Pocket DPA filter to catch colorful mist
-
Air duct filter section
-
Cleaning filter box
-
Medium efficiency filter F5 pocket type
-
Box chemical filter
-
Coarse filter with washable aluminum mesh
Return/exhaust air intake
Main technical parameters ● Various combinations: can be equipped with primary, intermediate, high-efficiency, bacteriological or ultra-low resistance filters to improve the accuracy of exhaust air purification. Anti-leakage design: the box and frame are sealed...
Description
marker
Main technical parameters
● Various combinations: can be equipped with primary, intermediate, high efficiency, bacteriological or ultra-low resistance filters to improve the accuracy of extract air cleaning. Anti-leakage design: The box and frame are sealed with adhesive strips, with flange connection, the leakage rate is ≤0.5%, reducing the leakage of pollutants.
● Durable and easy to maintain: Cold rolled steel spray box, corrosion resistant; The filter material can be replaced individually.
● Convenient installation: Support top mounting, bottom mounting and other installation methods, equipped with lifting interface and flange, suitable for a variety of clean room structures.
Usage and Scenario
● Treatment of exhaust air in a general workshop (eg mechanical processing, warehousing); exhaust air system in a hospital clinic and general ward.
Material and structural design
● Static pressure box: 1.1mm thick steel sheet or 304 stainless steel welded casting, internal damping treatment (with sound-absorbing cotton) to reduce air flow noise;
● Grille/louver panels: aluminum alloy, with grille, rain-proof louver (outdoor installation) design to ensure that the air flow is distributed evenly;
● Primary / intermediate filter effect: Standard with primary or intermediate filters matched to the air supply frame;
Process and Productivity Benefits
●Easy Maintenance Design: The lattice panel adopts a latch type connection, which can be disassembled and cleaned without tools.
● Anti-clogging: the grille has an inclined design (inclination angle 15°), large particles of dirt naturally roll down under the influence of gravity (for example, kitchen residues), which reduces clogging of the grille;
Installation and Maintenance Guide
●Easy installation: Support wall or duct installation, and use flange butt joints to connect to the exhaust pipe, and for outdoor installation, add rain louvers, and there are drainage holes at the bottom to prevent rainwater from flowing in. There are drainage holes at the bottom to prevent rainwater from flowing in. Filter replacement cycle: normal environment: 3-6 months; heavily polluted environment: 1-2 months; mandatory replacement when resistance reaches final resistance.
GENERAL INFORMATION
1. PACKAGING, DELIVERY
● Rigid box + pallet + moisture-proof film packaging
● Support for international logistics, sea / land transport.
2.Delivery, sample
● Shipping: Spot products will be shipped within 48 hours, custom products will be shipped within 7-10 days (depending on size and performance level), logistics tracking number will be provided.
● Samples: Free standard samples (customer bears shipping cost), 2-3 days.
3.after-sales settlement
● Payment: T/T / partial prepayment
● 3 months warranty (unconditional replacement of defective products)
4.qualification, certification
● ISO 9001 quality management system certification
● ISO14001 environmental management system certification
● ISO45001 occupational health and safety management system certification
● Third Party Audit Report (CNAS)
contact us
Related Popular Products
Pocket DPA filter to catch colorful mist
The DPA filter bag is a specialized dry paint spray filter bag designed for the paint industry. It uses a 3D composite filter media with a diamond-shaped honeycomb pattern; Its deep filtration structure effectively solves common problems such as rapid clogging, short service life and paint leakage common with standard filter media. Made from eco-friendly fiberglass-free materials that are water and solvent resistant, it is compatible with a wide range of spray applications including water-based paints, solvent-based polyurethane paints, high-concentration coatings and powder spraying. Widely used in recirculation systems in dry spray booths, air return systems in curing ovens and as a pre-filtration for VOC treatment plants, effectively capturing tacky spray paint and particulates. This extends the life of fans, activated carbon and catalytic combustion, while significantly reducing consumables and shop maintenance costs.
Initial efficiency filter G4 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...
Medium efficiency filter F6 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...
Sub-high efficiency filter W-shaped
Key Features ● High-efficiency filtration: Using high-quality filter...
Plate filter for capturing varnish vapors
The lacquer vapor filter with aluminum frame and flat design is a standard consumable for pre-filtration in dry paint booths. The filter material is laid in an even layer inside the aluminum frame without folds or irregularities, which ensures smoother air flow. The filter is specially designed to capture liquid varnish vapors, pigment accumulations and resin dust formed during the painting process. The aluminum frame has a built-in anti-oxidation and anti-corrosion coating, allowing it to withstand the corrosive conditions found in paint booths with high levels of water vapor and solvent fumes; The flat design fits snugly into the air duct, eliminating paint accumulation in the folds and blocking the air flow. Filters are widely used on automatic painting lines for furniture, metal products, auto parts and plastic products, as well as in dry painting booths.
Medium efficiency filter F8 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...
Initial Efficiency Flat Panel Filter
Main technical characteristics: ● Dimensions: 287×592×21mm, 592×592×21mm and other standard...
Air duct filter section
Main Features ● Multi-stage filtration: according to water purification requirements...
Oil Mist Filter
Main Specification Parameters ● Product Structure: It is made of one layer, two or more...
High efficiency liquid seal supply diffuser
Main Parameters ● High-efficiency filtration: Equipped with a high-efficiency H-class filter...
Honeycomb chemical filter
Main technical parameters ● Highly efficient adsorption: activated carbon particles have...
Coarse filter with washable nylon mesh
Main technical characteristics: ● Highly efficient filtration: traps large particles...
Highly efficient supply diffuser with mechanical seal
Main characteristics and parameters ● High-efficiency filtration: Equipped with highly efficient...
Coarse filter with washable aluminum mesh
Main technical characteristics: ● Highly efficient filtration: multi-layer corrugated...
High efficiency filter with aluminum baffles
Main Specification Parameters ● High-efficiency filtration: Using ultra-fine filter...
High efficiency filter without baffles
Key Features ● Ultra-thin and highly effective: hot melt adhesive replaces the partition, then...