-
-
-
-
whatsapp
-
WeChat
Products
-
Pocket type chemical filter
-
High efficiency filter without baffles
-
FFU (filter unit)
-
Initial Efficiency Flat Panel Filter
-
Initial efficiency panel filter, washable
-
Highly efficient supply ceiling module
-
High efficiency paper filter
-
Medium efficiency filter F8 pocket type
-
Cleaning filter box
-
Panel filter F8 (medium efficiency)
-
High Temperature High Efficiency Filter
-
Pocket DPA filter to catch colorful mist
-
Sub-high efficiency filter W-shaped
-
Box High Efficiency Filter
-
High efficiency filter with aluminum baffles
-
Medium efficiency filter F9 pocket type
Oil Mist Filter
Main Specification Parameters ● Product structure: It is made of one layer, two or more layers of aluminum mesh, stainless steel mesh as filter material, which are rolled into a wave shape or flat, and then arranged by cross stacking on top of each other under...
Description
marker
Main Specification Parameters
● Product structure: It is made of one layer, two or more layers of aluminum mesh, stainless steel mesh as filter material, which are rolled into a wave shape or flat, and then arranged by cross stacking on top of each other at right angles. Multi-layer folded and expanded aluminum or stainless steel mesh has different densities and holes from coarse to fine, so that the air through the filter mesh changes flow direction several times, increasing its dust collection capacity and efficiency;
● low operating costs, self-draining support and convenient filter replacement;
● Energy-saving and environmentally friendly, oil mist recovery can reduce fuel consumption.
Usage and Scenario
● Central air conditioning hoods and primary filtration, special filtration of acids, alkalis or high temperature ventilation. Scope of application: semiconductor industry, pharmaceutical industry (FGMP, GMP), circuit board factory, heavy industry, chemical industry, furniture industry, cement industry, department store, steel industry, food industry, precision industry, electronics industry, hospitals, research departments, experimental departments. Not only used in industry, in fresh air ventilation or air conditioning, air handling equipment is also an economical and convenient solution.
Third, material and design
● Frame: profile, aluminum frame, galvanized frame, stainless steel frame.
● Material: aluminum mesh, stainless steel mesh, gas liquid filter mesh, aluminum foil mesh, etc.
● Structure: plate and frame type, multi-layer cross vertical and horizontal waveform aluminum mesh or stainless steel mesh composition, multi-layer structure.
Process and Productivity Benefits
● It can be reused many times and the long service life of the filter mesh can save cost.
● Both are made of 100% metal, acid and alkali resistant, high temperature resistant, easy to clean and maintain, not easy to oxidize, long service life.
● High airflow and low resistance. Multilayer metal expansion mesh increases the dust collection effect, consists of double-sided multilayer transverse longitudinal wave rows, more effective in increasing the filtration area.
Installation and Maintenance Manual
● Adaptable installation: support box type, flange connection or snap-on installation, adaptable to the air conditioner box and filter section of the fresh air unit.
● Replacement cycle: low concentration medium: 3-6 months; High concentration environment: 1-3 months, or should be replaced when the resistance reaches the final resistance.
GENERAL INFORMATION
1. PACKAGING, DELIVERY
●Hard box + pallet + moisture-proof film packaging
● Support for international logistics, sea/land transport.
2.Delivery, sample
● Shipping: Spot products will be shipped within 48 hours, custom products will be shipped within 7-10 days (depending on size and performance level), logistics tracking number will be provided.
● Samples: Free standard samples (customer bears shipping cost), 2-3 days.
3.after-sales settlement
● Payment: T/T / partial prepayment
● 3-month warranty (unconditional replacement of defective products)
4.qualification, certification
● ISO 9001 quality management system certification
● ISO14001 environmental management system certification
● ISO45001 certification of occupational health and safety management system
● Third Party Audit Report (CNAS)
contact us
Related Popular Products
Air duct filter section
Main Features ● Multi-stage filtration: according to water purification requirements...
High efficiency liquid seal filter
Main Features ● Ultra-thin and highly effective: hot melt adhesive replaces the partition, im...
Panel filter F8 (medium efficiency)
Product Description This F8 medium efficiency panel filter is made using reflective...
High Temperature High Efficiency Filter
Main Specifications ● Temperature resistance and durability: can withstand 250℃-400℃...
Initial efficiency filter G4 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...
Sub-high efficiency filter W-shaped
Key Features ● High-efficiency filtration: Using high-quality filter...
Coarse filter with washable aluminum mesh
Main technical characteristics: ● Highly efficient filtration: multi-layer corrugated...
Medium efficiency filter F5 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...
Highly efficient supply diffuser with mechanical seal
Main characteristics and parameters ● High-efficiency filtration: Equipped with highly efficient...
Pocket DPA filter to catch colorful mist
The DPA filter bag is a specialized dry paint spray filter bag designed for the paint industry. It uses a 3D composite filter media with a diamond-shaped honeycomb pattern; Its deep filtration structure effectively solves common problems such as rapid clogging, short service life and paint leakage common with standard filter media. Made from eco-friendly fiberglass-free materials that are water and solvent resistant, it is compatible with a wide range of spray applications including water-based paints, solvent-based polyurethane paints, high-concentration coatings and powder spraying. Widely used in recirculation systems in dry spray booths, air return systems in curing ovens and as a pre-filtration for VOC treatment plants, effectively capturing tacky spray paint and particulates. This extends the life of fans, activated carbon and catalytic combustion, while significantly reducing consumables and shop maintenance costs.
Pocket type chemical filter
Main technical parameters ● Made of natural or artificial fiber, structure...
Initial efficiency panel filter, washable
Main technical characteristics: ● Dimensions: 287×592×46mm, 592×592×46mm and other standard...
Return/exhaust air intake
Main technical parameters ● Various combinations: can be equipped with primary, intermediate...
Medium efficiency filter F9 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...
Plate filter for capturing varnish vapors
The lacquer vapor filter with aluminum frame and flat design is a standard consumable for pre-filtration in dry paint booths. The filter material is laid in an even layer inside the aluminum frame without folds or irregularities, which ensures smoother air flow. The filter is specially designed to capture liquid varnish vapors, pigment accumulations and resin dust formed during the painting process. The aluminum frame has a built-in anti-oxidation and anti-corrosion coating, allowing it to withstand the corrosive conditions found in paint booths with high levels of water vapor and solvent fumes; The flat design fits snugly into the air duct, eliminating paint accumulation in the folds and blocking the air flow. Filters are widely used on automatic painting lines for furniture, metal products, auto parts and plastic products, as well as in dry painting booths.
Medium efficiency filter F8 pocket type
Main technical characteristics: ● Highly efficient filtration: filter material made of high...